To navigate to the section you're interested in learning more about or purchasing products, simply click on each photo. The page will automatically scroll down to the corresponding section.
HairTimecess
27D
P l u s
HairTimecess
7D
P l u s
.png){kind=small}
.png){kind=small}
.png){kind=small}
HairTimecess
4D
P l u s
.png){kind=small}
.png){kind=small}
.png){kind=small}
HairTimecess
3D
P l u s
.png){kind=small}
.png){kind=small}
.png){kind=small}
The REPRONIZER 27D Plus currently represents the most advanced level of Bioprogramming technology in the REPRONIZER. At the 27D level, experience the fastest possible transformation in hair quality, with the most pronounced increase in moisture and shine, decrease in friction, and zero damage to your hair.
The REPRONIZER 27D Plus also features Universal Voltage, allowing the device to be safely used in most countries. Through the power of the 27D level of technology, delve deeper than ever before into your journey to Honshitsubi.
REPRONIZER 27D Plus
NOT A BLOW DRYER
Prices
-
REPRONIZER 27D PLUS $1,020.00
Features
-
Fastest drying time among REPRONIZER devices
-
The all-new detachable nozzle twists into place with an inverted attachment point for a smooth aesthetic when detached from the unit
-
Universal Voltage AC 100-240V 50/60Hz
-
Three digital airspeed buttons
-
Cool/Hot Temperature switch button
-
Glossy purple/black finish
-
Slim and Sleek Design
How to Use the REPRONIZER
-
For a basic, beautiful dry
Run your fingers through your hair while drying to ensure that air from the REPRONIZER reaches the roots. -
For a healthy and conditioned look
Use on dry hair. Blow air from the REPRONIZER onto the roots where volume is lacking, where hair tends to split, or on areas of hair that are dull and lifeless.Switch between hot and cool air in equal intervals, following the natural flow of your hair.
-
Use the Mitsudonose technique on areas you wish to change
For areas of hair that are frizzy, twisted, oddly bent, or do not lay flat, the key is to use the Mitsudonose technique. The Mitsudonose technique can be used by switching between hot and cool air in equal intervals on the areas you wish to change.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
The REPRONIZER 7D Plus brings a massive increase in Bioprogramming technology over the previous generation of devices. At the 7D level, you will see a significant and near-immediate increase of moisture and shine, while experiencing a dramatic decrease in friction, and zero damage to your hair. The REPRONIZER 7D Plus also features Universal Voltage, allowing the device to be safely used in most countries. At the 7D level, Bioprogramming technology will allow you to take a giant leap further into your journey to Honshitsubi.
REPRONIZER 7D Plus
NOT A BLOW DRYER
Price
-
REPRONIZER 7D PLUS $720.00
Features
-
The detachable nozzle that presses into place
-
Universal Voltage AC 100-240V 50/60Hz
-
Three digital airspeed buttons
-
Cool/Hot Temperature switch button
-
Glossy emerald green/black finish
-
Slim and Sleek Design
How to Use the REPRONIZER
-
For a basic, beautiful dry
Run your fingers through your hair while drying to ensure that air from the REPRONIZER reaches the roots. -
For a healthy and conditioned look
Use on dry hair. Blow air from the REPRONIZER onto the roots where volume is lacking, where hair tends to split, or on areas of hair that are dull and lifeless.Switch between hot and cool air in equal intervals, following the natural flow of your hair.
-
Use the Mitsudonose technique on areas you wish to change
For areas of hair that are frizzy, twisted, oddly bent, or do not lay flat, the key is to use the Mitsudonose technique. The Mitsudonose technique can be used by switching between hot and cool air in equal intervals on the areas you wish to change.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
_edited.jpg)
The REPRONIZER 4D Plus is the next iteration of Bioprogramming technology to guide you on your path to discover Honshitsubi. At the 4D level of technology, you will see a major amplification of the Bioprogramming effect with noticeably more moisture and shine, less friction, and zero damage to your hair.
REPRONIZER 4D Plus
NOT A BLOW DRYER
Price
-
REPRONIZER 4D PLUS $520.00
Features
-
Detachable nozzle that presses into place
-
Three digital airspeed buttons
-
Cool/Hot Temperature switch button
-
Glossy black/gold finish
-
Slim and Sleek Design
How to Use the REPRONIZER
-
For a basic, beautiful dry
Run your fingers through your hair while drying to ensure that air from the REPRONIZER reaches the roots. -
For a healthy and conditioned look
Use on dry hair. Blow air from the REPRONIZER onto the roots where volume is lacking, where hair tends to split, or on areas of hair that are dull and lifeless.Switch between hot and cool air in equal intervals, following the natural flow of your hair.
-
Use the Mitsudonose technique on areas you wish to change
For areas of hair that are frizzy, twisted, oddly bent, or do not lay flat, the key is to use the Mitsudonose technique. The Mitsudonose technique can be used by switching between hot and cool air in equal intervals on the areas you wish to change.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
.jpeg)
.jpeg)
The REPRONIZER 3D Plus is the entry point for Bioprogramming devices and features the introductory level of Bioprogramming technology. At the 3D level, you will be able to experience increased moisture and shine, less friction, and zero damage to your hair after each use.
The REPRONIZER 3D Plus represents great value for those who are new to Bioprogramming technology and who are interested in starting their journey toward Honshitsubi.
REPRONIZER 3D Plus
NOT A BLOW DRYER
Price
-
REPRONIZER 3D Plus $330.00
Features
-
Detachable nozzle that presses into place
-
Hot (high and low) and cool air settings
-
“Quick Cool” button
-
Matte white/grey finish
-
Classic Design
How to Use the REPRONIZER
-
For a basic, beautiful dry
Run your fingers through your hair while drying to ensure that air from the REPRONIZER reaches the roots. -
For a healthy and conditioned look
Use on dry hair. Blow air from the REPRONIZER onto the roots where volume is lacking, where hair tends to split, or on areas of hair that are dull and lifeless.Switch between hot and cool air in equal intervals, following the natural flow of your hair.
-
Use the Mitsudonose technique on areas you wish to change
For areas of hair that are frizzy, twisted, oddly bent, or do not lay flat, the key is to use the Mitsudonose technique. The Mitsudonose technique can be used by switching between hot and cool air in equal intervals on the areas you wish to change.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
.jpeg)
.jpeg)
HAIRBEAURON 27D Plus [STRAIGHT]
**** ONE SIZE ONLY*****
Prices
-
HAIRBEAURON 27D PLUS [STRAIGHT] $950.00
Features
-
Elongated tips with heat-reducing slits for increased ease in handling and styling
-
Flexible ceramic plates for more precision and control
-
Universal Voltage AC 100-240V 50/60Hz
-
Glossy purple/black finish
How to Use the HAIRBEAURON [STRAIGHT]
-
Turn on the power and select the desired temperature. Take a section of your hair and clamp it between the plates.
Do not apply any styling products to your hair when using the HAIRBEAURON [STRAIGHT] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Slowly and repeatedly slide the HAIRBEAURON [STRAIGHT] through your hair.
Smoothly slide the plates through each section of the hair as if brushing it. Use the device slowly and repeatedly. The slower the better.
The HAIRBEAURON 27D Plus [STRAIGHT] currently represents the most advanced level of Bioprogramming technology. At the 27D level, experience the fastest possible transformation in hair quality, with the most pronounced increase in moisture and shine, decrease in friction, and zero damage to your hair. Beautifully condition your hair with this device, even when unplugged.
The HAIRBEAURON 27D Plus [STRAIGHT] also features Universal Voltage, allowing the device to be safely used in most countries.
Through the power of the 27D level of technology, delve deeper than ever before into your journey to Honshitsubi.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
.jpeg)
.jpeg)
The HAIRBEAURON 7D Plus [STRAIGHT] brings a massive increase in Bioprogramming technology over the previous generation of devices. At the 7D level, you will see a significant and near-immediate increase of moisture and shine, while experiencing a dramatic decrease in friction, and zero damage to your hair. Beautifully condition your hair with this device, even when unplugged.
The HAIRBEAURON 7D Plus [STRAIGHT] also features Universal Voltage, allowing the device to be safely used in most countries. At the 7D level, Bioprogramming technology will allow you to take a giant leap further into your journey to Honshitsubi.
HAIRBEAURON 7D Plus [STRAIGHT]
**** ONE SIZE ONLY*****
Prices
-
HAIRBEAURON 7D PLUS [STRAIGHT] $650.00
Features
-
Elongated tips with heat-reducing slits for increased ease in handling and styling
-
Flexible ceramic plates for more precision and control
-
Universal Voltage AC 100-240V 50/60Hz
-
Improved shine and moisture in hair with less friction
-
Glossy emerald green/black finish
How to Use the HAIRBEAURON [STRAIGHT]
-
Turn on the power and select the desired temperature. Take a section of your hair and clamp it between the plates.
Do not apply any styling products to your hair when using the HAIRBEAURON [STRAIGHT] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Slowly and repeatedly slide the HAIRBEAURON [STRAIGHT] through your hair.
Smoothly slide the plates through each section of the hair as if brushing it. Use the device slowly and repeatedly. The slower the better.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
The HAIRBEAURON 4D Plus [STRAIGHT] is the next iteration of Bioprogramming technology to guide you on your path to discover Honshitsubi.
At the 4D level of Bioprogramming technology programmed into the ceramics of the device, you will see a major amplification of the Bioprogramming effect with noticeably more moisture and shine, less friction, and zero damage to your hair. The HAIRBEAURON 4D Plus [STRAIGHT] also features Universal Voltage, allowing the device to be safely used in most countries. Beautifully condition your hair with this device, even when unplugged.
HAIRBEAURON 4D Plus [STRAIGHT]
**** ONE SIZE ONLY*****
Prices
-
HAIRBEAURON 4D PLUS [STRAIGHT] $450.00
Features
-
Universal Voltage AC 100-240V 50/60Hz
-
Improved shine and moisture in hair with less friction
-
Glossy black/gold finish
How to Use the HAIRBEAURON [STRAIGHT]
-
Turn on the power and select the desired temperature. Take a section of your hair and clamp it between the plates.
Do not apply any styling products to your hair when using the HAIRBEAURON [STRAIGHT] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Slowly and repeatedly slide the HAIRBEAURON [STRAIGHT] through your hair.
Smoothly slide the plates through each section of the hair as if brushing it. Use the device slowly and repeatedly. The slower the better.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
.jpeg)
HAIRBEAURON 3D Plus [STRAIGHT]
**** ONE SIZE ONLY*****
Prices
-
HAIRBEAURON 3D PLUS [STRAIGHT] $300.00
Features
-
Universal Voltage AC 100-240V 50/60Hz
-
Improved shine and moisture in hair with less friction
-
Matte white/blue finish
How to Use the HAIRBEAURON [STRAIGHT]
-
Turn on the power and select the desired temperature. Take a section of your hair and clamp it between the plates.
Do not apply any styling products to your hair when using the HAIRBEAURON [STRAIGHT] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Slowly and repeatedly slide the HAIRBEAURON [STRAIGHT] through your hair.
Smoothly slide the plates through each section of the hair as if brushing it. Use the device slowly and repeatedly. The slower the better.
The HAIRBEAURON 3D Plus [STRAIGHT] is the entry point for Bioprogramming devices, and features the introductory level of Bioprogramming technology. At the 3D level, you will be able to experience increased moisture and shine, less friction, and zero damage to your hair after each use. Use this device to condition your hair, even when unplugged.
The HAIRBEAURON 3D Plus [STRAIGHT] also features Universal Voltage, allowing the device to be safely used in most countries. The HAIRBEAURON 3D Plus [STRAIGHT] represents great value for those who are new to Bioprogramming technology and who are interested in starting their journey toward Honshitsubi.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
The REPRONIZER 27D Plus currently represents the most advanced level of Bioprogramming technology in the REPRONIZER. At the 27D level, experience the fastest possible transformation in hair quality, with the most pronounced increase in moisture and shine, decrease in friction, and zero damage to your hair.
The REPRONIZER 27D Plus also features Universal Voltage, allowing the device to be safely used in most countries. Through the power of the 27D level of technology, delve deeper than ever before into your journey to Honshitsubi.
HAIRBEAURON 27D Plus [CURL]
COMES IN 2 SIZES (SIZE S-TYPE 1 IN & SIZE L-TYPE 1.4 IN
***ALL HAIRBEAURON {CURL] N SIZE L-TYPE 1.4 IN ARE AVAILABLE UPON REQUEST ONLY AND CAN TAKE A FEW EXTRA DAYS TO BE DELIVERED.***
Prices
-
HAIRBEAURON 27D PLUS [CURL] $950S-TYPE 1.0 IN
Features
-
Universal Voltage AC 100-240V 50/60Hz
-
Significantly faster heating time than previous devices
-
Available in two sizes: S-Type (1.0 in.) / L-Type (1.4 in.)
-
Glossy purple/black finish
How to Use the HAIRBEAURON [CURL]
-
Turn on the power and select the desired temperature. Take a section of hair and hold it around the middle of the barrel, using the clamp, and smoothly slide the device down the length of your hair to the ends.
Do not apply any styling products to your hair when using the HAIRBEAURON [CURL] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Support the head (at the end of the device) with your hand and rotate the device so that hair wraps around the barrel.
-
To release the hair, partially open the clamp while lowering the device.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
The HAIRBEAURON 7D Plus [CURL] brings a massive increase in Bioprogramming technology over the previous generation of devices. At the 7D level, you will see a significant and near-immediate increase of moisture and shine, while experiencing a dramatic decrease in friction, and zero damage to your hair.
Create beautiful, healthy curls, even in the lowest heat setting. From the first use, you will be able to notice a visible change in your hair from root to tip just by clamping a section of hair for an extended period. Curl and re-curl your hair until you achieve your desired hairstyle, without the need for any styling products, and without the risk of damaging your hair.
The HAIRBEAURON 7D Plus [CURL] also features Universal Voltage, allowing the device to be safely used in most countries. At the 7D level, Bioprogramming technology will allow you to take a giant leap further into your journey to Honshitsubi.
HAIRBEAURON 7D Plus [CURL]
COMES IN 2 SIZES (SIZE S-TYPE 1 IN & SIZE L-TYPE 1.4 IN
***ALL HAIRBEAURON {CURL] N SIZE L-TYPE 1.4 IN ARE AVAILABLE UPON REQUEST ONLY AND CAN TAKE A FEW EXTRA DAYS TO BE DELIVERED.***
Prices
-
HAIRBEAURON 7D PLUS [CURL] S $650.00-TYPE 1.0 IN
Features
-
Universal Voltage AC 100-240V 50/60Hz
-
Significantly faster heating time than previous devices
-
Available in two sizes: S-Type (1.0 in.) / L-Type (1.4 in.)
-
Glossy emerald green/black finish
How to Use the HAIRBEAURON [CURL]
-
Turn on the power and select the desired temperature. Take a section of hair and hold it around the middle of the barrel, using the clamp, and smoothly slide the device down the length of your hair to the ends.
Do not apply any styling products to your hair when using the HAIRBEAURON [CURL] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Support the head (at the end of the device) with your hand and rotate the device so that hair wraps around the barrel.
-
To release the hair, partially open the clamp while lowering the device.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
.jpeg)
.jpeg)
The HAIRBEAURON 4D Plus [CURL] is the next iteration of Bioprogramming technology to guide you on your path to discover Honshitsubi. At the 4D level of Bioprogramming technology programmed into the ceramics of the device, you will see a major amplification of the Bioprogramming effect with noticeably more moisture and shine, less friction, and zero damage to your hair.
Create beautiful, healthy curls, even in the lowest heat setting. You will be able to notice a visible change in your hair from root to tip, just by clamping a section of hair for an extended period. Curl and re-curl with this device until you achieve the desired hairstyle, without using water or styling products.
The HAIRBEAURON 4D Plus [CURL] also features Universal Voltage, allowing the device to be safely used in most countries.
HAIRBEAURON 4D Plus [CURL]
COMES IN 2 SIZES (SIZE S-TYPE 1 IN & SIZE L-TYPE 1.4 IN
***ALL HAIRBEAURON {CURL] N SIZE L-TYPE 1.4 IN ARE AVAILABLE UPON REQUEST ONLY AND CAN TAKE A FEW EXTRA DAYS TO BE DELIVERED.***
Prices
-
HAIRBEAURON 4D PLUS [CURL] $450.00 S-TYPE 1.0 IN
Features
-
Universal Voltage AC 100-240V 50/60Hz
-
Significantly faster heating time than previous devices
-
Available in two sizes: S-Type (1.0 in.) / L-Type (1.4 in.)
-
Glossy purple/black finish
How to Use the HAIRBEAURON [CURL]
-
Turn on the power and select the desired temperature. Take a section of hair and hold it around the middle of the barrel, using the clamp, and smoothly slide the device down the length of your hair to the ends.
Do not apply any styling products to your hair when using the HAIRBEAURON [CURL] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Support the head (at the end of the device) with your hand and rotate the device so that hair wraps around the barrel.
-
To release the hair, partially open the clamp while lowering the device.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.
.jpeg)
.jpeg)
The HAIRBEAURON 3DPlus [CURL] is the next iteration of Bioprogramming technology to guide you on your path to discover Honshitsubi. At the 3D level of Bioprogramming technology programmed into the ceramics of the device, you will see a major amplification of the Bioprogramming effect with noticeably more moisture and shine, less friction, and zero damage to your hair.
Create beautiful, healthy curls, even in the lowest heat setting. You will be able to notice a visible change in your hair from root to tip, just by clamping a section of hair for an extended period. Curl and re-curl with this device until you achieve the desired hairstyle, without using water or styling products.
The HAIRBEAURON 3D Plus [CURL] also features Universal Voltage, allowing the device to be safely used in most countries.
HAIRBEAURON 3D Plus [CURL]
COMES IN 2 SIZES (SIZE S-TYPE 1 IN & SIZE L-TYPE 1.4 IN
***ALL HAIRBEAURON {CURL] N SIZE L-TYPE 1.4 IN ARE AVAILABLE UPON REQUEST ONLY AND CAN TAKE A FEW EXTRA DAYS TO BE DELIVERED.***
Prices
-
HAIRBEAURON 3D PLUS [CURL] $300.00 S-TYPE 1.0 IN
Features
-
Universal Voltage AC 100-240V 50/60Hz
-
Available in two sizes: S-Type (1.0 in.) / L-Type (1.4 in.)
-
Matte white/blue finish
How to Use the HAIRBEAURON [CURL]
-
Turn on the power and select the desired temperature. Take a section of hair and hold it around the middle of the barrel, using the clamp, and smoothly slide the device down the length of your hair to the ends.
Do not apply any styling products to your hair when using the HAIRBEAURON [CURL] (using the device on hair treated with coating agents or oils may damage hair). After confirming the condition of your hair, start with a low temperature and gradually increase to the desired temperature setting.
-
Support the head (at the end of the device) with your hand and rotate the device so that hair wraps around the barrel.
-
To release the hair, partially open the clamp while lowering the device.
How to Increase the P-Value
-
Increase the D (Density）
The higher the level of Bioprogramming, the higher the density. By using it together with other Bioprogramming products, the density is even further intensified (Mitsudonose technique). -
Lengthen the t (Time）
The density of the quantum field is maintained the more time (t) the device is used, increasing your hair’s power to become beautiful.